The QDebug class provides an output stream for debugging information. More...
Header: | #include <QDebug> |
qmake: | QT += core |
class | Stream |
QDebug(QIODevice *device) | |
QDebug(QString *string) | |
QDebug(QtMsgType t) | |
QDebug(const QDebug &o) | |
~QDebug() | |
bool | autoInsertSpaces() const |
QDebug & | maybeQuote(char c = '"') |
QDebug & | maybeSpace() |
QDebug & | noquote() |
QDebug & | nospace() |
QDebug & | quote() |
QDebug & | resetFormat() |
void | setAutoInsertSpaces(bool b) |
void | setVerbosity(int verbosityLevel) |
QDebug & | space() |
void | swap(QDebug &other) |
int | verbosity() const |
QDebug & | operator<<(QChar t) |
QDebug & | operator<<(bool t) |
QDebug & | operator<<(char t) |
QDebug & | operator<<(short t) |
QDebug & | operator<<(unsigned short t) |
QDebug & | operator<<(char16_t t) |
QDebug & | operator<<(char32_t t) |
QDebug & | operator<<(unsigned int t) |
QDebug & | operator<<(long t) |
QDebug & | operator<<(unsigned long t) |
QDebug & | operator<<(qint64 t) |
QDebug & | operator<<(quint64 t) |
QDebug & | operator<<(float t) |
QDebug & | operator<<(double t) |
QDebug & | operator<<(const char *t) |
QDebug & | operator<<(const QString &t) |
QDebug & | operator<<(const QStringRef &t) |
QDebug & | operator<<(QStringView s) |
QDebug & | operator<<(QLatin1String t) |
QDebug & | operator<<(const QByteArray &t) |
QDebug & | operator<<(const void *t) |
QDebug & | operator=(const QDebug &other) |
QDebug | operator<<(QDebug debug, const QList<T> &list) |
QDebug | operator<<(QDebug debug, const QVector<T> &vec) |
QDebug | operator<<(QDebug debug, const QSet<T> &set) |
QDebug | operator<<(QDebug debug, const int &map) |
QDebug | operator<<(QDebug debug, const QMap<Key, T> &map) |
QDebug | operator<<(QDebug debug, const QHash<Key, T> &hash) |
QDebug | operator<<(QDebug debug, const QPair<T1, T2> &pair) |
QDebug | operator<<(QDebug debug, const QFlags<T> &flags) |
The QDebug class provides an output stream for debugging information.
QDebug is used whenever the developer needs to write out debugging or tracing information to a device, file, string or console.
In the common case, it is useful to call the qDebug() function to obtain a default QDebug object to use for writing debugging information.
qDebug() << "Date:" << QDate::currentDate(); qDebug() << "Types:" << QString("String") << QChar('x') << QRect(0, 10, 50, 40); qDebug() << "Custom coordinate type:" << coordinate;
This constructs a QDebug object using the constructor that accepts a QtMsgType value of QtDebugMsg. Similarly, the qWarning(), qCritical() and qFatal() functions also return QDebug objects for the corresponding message types.
The class also provides several constructors for other situations, including a constructor that accepts a QFile or any other QIODevice subclass that is used to write debugging information to files and other devices. The constructor that accepts a QString is used to write to a string for display or serialization.
QDebug formats output so that it's easily readable. It automatically adds spaces between arguments, and adds quotes around QString, QByteArray, QChar arguments.
You can tweak these options through the space(), nospace() and quote(), noquote() methods. Furthermore, QTextStream manipulators can be piped into a QDebug stream.
QDebugStateSaver limits changes to the formatting to the current scope. resetFormat() resets the options to the default ones.
Many standard types can be written to QDebug objects, and Qt provides support for most Qt value types. To add support for custom types, you need to implement a streaming operator, as in the following example:
QDebug operator<<(QDebug debug, const Coordinate &c) { QDebugStateSaver saver(debug); debug.nospace() << '(' << c.x() << ", " << c.y() << ')'; return debug; }
This is described in the Debugging Techniques and Creating Custom Qt Types documents.
Constructs a debug stream that writes to the given device.
Constructs a debug stream that writes to the given string.
Constructs a debug stream that writes to the handler for the message type t.
Constructs a copy of the other debug stream o.
Flushes any pending data to be written and destroys the debug stream.
Returns true
if this QDebug instance will automatically insert spaces between writes.
This function was introduced in Qt 5.0.
See also setAutoInsertSpaces() and QDebugStateSaver.
Writes a character c to the debug stream, depending on the current setting for automatic insertion of quotes, and returns a reference to the stream.
The default character is a double quote "
.
This function was introduced in Qt 5.4.
See also quote() and noquote().
Writes a space character to the debug stream, depending on the current setting for automatic insertion of spaces, and returns a reference to the stream.
See also space() and nospace().
Disables automatic insertion of quotation characters around QChar, QString and QByteArray contents and returns a reference to the stream.
When quoting is disabled, these types are printed without quotation characters and without escaping of non-printable characters.
This function was introduced in Qt 5.4.
See also quote() and maybeQuote().
Disables automatic insertion of spaces and returns a reference to the stream.
See also space() and maybeSpace().
Enables automatic insertion of quotation characters around QChar, QString and QByteArray contents and returns a reference to the stream.
Quoting is enabled by default.
This function was introduced in Qt 5.4.
See also noquote() and maybeQuote().
Resets the stream formatting options, bringing it back to its original constructed state.
This function was introduced in Qt 5.4.
Enables automatic insertion of spaces between writes if b is true; otherwise automatic insertion of spaces is disabled.
This function was introduced in Qt 5.0.
See also autoInsertSpaces() and QDebugStateSaver.
Sets the verbosity of the stream to verbosityLevel.
The allowed range is from 0 to 7. The default value is 2.
This function was introduced in Qt 5.6.
See also verbosity().
Writes a space character to the debug stream and returns a reference to the stream.
The stream remembers that automatic insertion of spaces is enabled for future writes.
See also nospace() and maybeSpace().
Swaps this debug stream instance with other. This function is very fast and never fails.
This function was introduced in Qt 5.0.
Returns the verbosity of the debug stream.
Streaming operators can check the value to decide whether verbose output is desired and print more information depending on the level. Higher values indicate that more information is desired.
The allowed range is from 0 to 7. The default value is 2.
This function was introduced in Qt 5.6.
See also setVerbosity().
Writes the character, t, to the stream and returns a reference to the stream. Normally, QDebug prints control characters and non-US-ASCII characters as their C escape sequences or their
Unicode value (\u1234). To print non-printable characters without transformation, enable the noquote() functionality, but note that some QDebug backends may
not be 8-bit clean and may not be able to represent t
.
Writes the boolean value, t, to the stream and returns a reference to the stream.
Writes the character, t, to the stream and returns a reference to the stream.
Writes the signed short integer, t, to the stream and returns a reference to the stream.
Writes then unsigned short integer, t, to the stream and returns a reference to the stream.
Writes the UTF-16 character, t, to the stream and returns a reference to the stream.
This function was introduced in Qt 5.5.
Writes the UTF-32 character, t, to the stream and returns a reference to the stream.
This function was introduced in Qt 5.5.
Writes then unsigned integer, t, to the stream and returns a reference to the stream.
Writes the signed long integer, t, to the stream and returns a reference to the stream.
Writes then unsigned long integer, t, to the stream and returns a reference to the stream.
Writes the signed 64-bit integer, t, to the stream and returns a reference to the stream.
Writes then unsigned 64-bit integer, t, to the stream and returns a reference to the stream.
Writes the 32-bit floating point number, t, to the stream and returns a reference to the stream.
Writes the 64-bit floating point number, t, to the stream and returns a reference to the stream.
Writes the '\0'-terminated string, t, to the stream and returns a reference to the stream. The string is never quoted nor transformed to the output, but note that some QDebug backends might not be 8-bit clean.
Writes the string, t, to the stream and returns a reference to the stream. Normally, QDebug prints the string inside quotes and transforms non-printable characters to their Unicode values (\u1234).
To print non-printable characters without transformation, enable the noquote() functionality. Note that some QDebug backends might not be 8-bit clean.
Output examples:
QString s; s = "a"; qDebug().noquote() << s; // prints: a qDebug() << s; // prints: "a" s = "\"a\r\n\""; qDebug() << s; // prints: "\"a\r\n\"" s = "\033"; // escape character qDebug() << s; // prints: "\u001B" s = "\u00AD"; // SOFT HYPHEN qDebug() << s; // prints: "\u00AD" s = "\u00E1"; // LATIN SMALL LETTER A WITH ACUTE qDebug() << s; // prints: "á" s = "a\u0301"; // "a" followed by COMBINING ACUTE ACCENT qDebug() << s; // prints: "á"; s = "\u0430\u0301"; // CYRILLIC SMALL LETTER A followed by COMBINING ACUTE ACCENT qDebug() << s; // prints: "а́"
Writes the string, t, to the stream and returns a reference to the stream. Normally, QDebug prints the string inside quotes and transforms non-printable characters to their Unicode values (\u1234).
To print non-printable characters without transformation, enable the noquote() functionality. Note that some QDebug backends might not be 8-bit clean.
See the QString overload for examples.
Writes the string view, s, to the stream and returns a reference to the stream. Normally, QDebug prints the string inside quotes and transforms non-printable characters to their Unicode values (\u1234).
To print non-printable characters without transformation, enable the noquote() functionality. Note that some QDebug backends might not be 8-bit clean.
See the QString overload for examples.
This function was introduced in Qt 5.10.
Writes the string, t, to the stream and returns a reference to the stream. Normally, QDebug prints the string inside quotes and transforms non-printable characters to their Unicode values (\u1234).
To print non-printable characters without transformation, enable the noquote() functionality. Note that some QDebug backends might not be 8-bit clean.
See the QString overload for examples.
Writes the byte array, t, to the stream and returns a reference to the stream. Normally, QDebug prints the array inside quotes and transforms control or non-US-ASCII characters to their C escape sequences (\xAB). This way, the output is always 7-bit clean and the string can be copied from the output and pasted back into C++ sources, if necessary.
To print non-printable characters without transformation, enable the noquote() functionality. Note that some QDebug backends might not be 8-bit clean.
Output examples:
QByteArray ba; ba = "a"; qDebug().noquote() << ba; // prints: a qDebug() << ba; // prints: "a" ba = "\"a\r\n\""; qDebug() << ba; // prints: "\"a\r\n\"" ba = "\033"; // escape character qDebug() << ba; // prints: "\x1B" ba = "\xC3\xA1"; qDebug() << ba; // prints: "\xC3\xA1" ba = QByteArray("a\0b", 3); qDebug() << ba // prints: "\a\x00""b"
Note how QDebug needed to close and reopen the string in the way C and C++ languages concatenate string literals so that the letter 'b' is not interpreted as part of the previous hexadecimal escape sequence.
Writes a pointer, t, to the stream and returns a reference to the stream.
Assigns the other debug stream to this stream and returns a reference to this stream.
Writes the contents of list to debug. T
needs to support streaming into QDebug.
Writes the contents of vector vec to debug. T
needs to support streaming into QDebug.
Writes the contents of set to debug. T
needs to support streaming into QDebug.
Writes the contents of map to debug. Both Key
and T
need to support streaming into QDebug.
This function was introduced in Qt 5.7.
Writes the contents of map to debug. Both Key
and T
need to support streaming into QDebug.
Writes the contents of hash to debug. Both Key
and T
need to support streaming into QDebug.
Writes the contents of pair to debug. Both T1
and T2
need to support streaming into QDebug.
Writes flags to debug.
This function was introduced in Qt 4.7.