QModbusDataUnit is a container class representing single bit and 16
bit word entries in the Modbus register. More...
Header: | #include <QModbusDataUnit> |
qmake: | QT += serialbus |
Since: | Qt 5.8 |
enum | RegisterType { Invalid, DiscreteInputs, Coils, InputRegisters, HoldingRegisters } |
QModbusDataUnit() | |
QModbusDataUnit(QModbusDataUnit::RegisterType type) | |
QModbusDataUnit(QModbusDataUnit::RegisterType type, int address, quint16 size) | |
QModbusDataUnit(QModbusDataUnit::RegisterType type, int address, const QVector<quint16> &data) | |
bool | isValid() const |
QModbusDataUnit::RegisterType | registerType() const |
void | setRegisterType(QModbusDataUnit::RegisterType type) |
void | setStartAddress(int address) |
void | setValue(int index, quint16 value) |
void | setValueCount(uint newCount) |
void | setValues(const QVector<quint16> &values) |
int | startAddress() const |
quint16 | value(int index) const |
uint | valueCount() const |
QVector<quint16> | values() const |
typedef | QModbusDataUnitMap |
QModbusDataUnit is a container class representing single bit and 16
bit word entries in the Modbus register.
QModbusDataUnit can be used for read and write operations. The entries are addressed via startAddress() and the valueCount() number of contiguous entries. registerType() determines which register is used for the operations. Note that some registers are read-only registers.
The actual values() are either single bit or 16
bit based. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils only accept single bits. Therefore 0
is interpreted as 0
and anything else 1
.
This enum describes all supported register types.
Constant | Value | Description |
---|---|---|
QModbusDataUnit::Invalid |
0 |
Set by the default constructor, do not use. |
QModbusDataUnit::DiscreteInputs |
1 |
This type of data can be provided by an I/O system. |
QModbusDataUnit::Coils |
2 |
This type of data can be alterable by an application program. |
QModbusDataUnit::InputRegisters |
3 |
This type of data can be provided by an I/O system. |
QModbusDataUnit::HoldingRegisters |
4 |
This type of data can be alterable by an application program. |
Constructs an empty, invalid QModbusDataUnit. Start address is set to -1
and the registerType is set to QModbusDataUnit::Invalid.
Constructs a unit of data for register type. Start address is set to 0
, data range and data values are empty.
Constructs a unit of data for registertype. Start address of the data is set to address and the size of the unit to size. The entries of values() are
initialized with 0
.
Constructs a unit of data for registertype. Start address of the data is set to address and the unit's values to data. The value count is implied by the data size.
Returns true
if the QModbusDataUnit
is valid; otherwise false
. A QModbusDataUnit
is considered valid if the registerType() is not QModbusDataUnit::Invalid and the startAddress() is
greater than or equal to 0
.
Returns the type of the register.
See also setRegisterType() and QModbusDataUnit::RegisterType.
Sets the register type.
See also registerType() and QModbusDataUnit::RegisterType.
Sets the start address of the data unit.
See also startAddress().
Sets the register at position index to value.
See also value().
Sets the size of the requested register's data block to newCount.
This may be different from values() size as this function is used to indicated the size of a data request. Only once the data request has been processed valueCount() is equal to the size of values().
See also valueCount().
Sets the values of the data unit. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils tables
only accept single bit value, so 0
is interpreted as 0
and anything else as 1
.
See also values().
Returns the start address of data unit in the register.
See also setStartAddress().
Return the value at position index.
See also setValue().
Returns the size of the requested register's data block or the size of data read from the device.
This function may not always return a count that equals values() size. Since this class is used to request data from the remote data register, the valueCount() can be used to indicate the size of the requested register's data block. Once the request has been processed, the valueCount() is equal to the size of values().
See also setValueCount().
Returns the data in the data unit. QModbusDataUnit::DiscreteInputs and QModbusDataUnit::Coils tables only
accept single bit value, so 0
is interpreted as 0
and anything else as 1
.
See also setValues().
Synonym for QMap<QModbusDataUnit::RegisterType, QModbusDataUnit>.
This typedef was introduced in Qt 5.8.