Learn what Felgo offers to help your business succeed. Start your free evaluation today! Felgo for Your Business

audiorecorder.cpp Example File

multimedia/audiorecorder/audiorecorder.cpp 
/****************************************************************************
**
** Copyright (C) 2017 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** BSD License Usage
** Alternatively, you may use this file under the terms of the BSD license
** as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of The Qt Company Ltd nor the names of its
**     contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "audiorecorder.h"
#include "audiolevel.h"

#include "ui_audiorecorder.h"

#include <QAudioProbe>
#include <QAudioRecorder>
#include <QDir>
#include <QFileDialog>
#include <QMediaRecorder>
#include <QStandardPaths>

static qreal getPeakValue(const QAudioFormat &format);
static QVector<qreal> getBufferLevels(const QAudioBuffer &buffer);

template <class T>
static QVector<qreal> getBufferLevels(const T *buffer, int frames, int channels);

AudioRecorder::AudioRecorder()
    : ui(new Ui::AudioRecorder)
{
    ui->setupUi(this);

    m_audioRecorder = new QAudioRecorder(this);
    m_probe = new QAudioProbe(this);
    connect(m_probe, &QAudioProbe::audioBufferProbed,
            this, &AudioRecorder::processBuffer);
    m_probe->setSource(m_audioRecorder);

    //audio devices
    ui->audioDeviceBox->addItem(tr("Default"), QVariant(QString()));
    for (auto &device: m_audioRecorder->audioInputs()) {
        ui->audioDeviceBox->addItem(device, QVariant(device));
    }

    //audio codecs
    ui->audioCodecBox->addItem(tr("Default"), QVariant(QString()));
    for (auto &codecName: m_audioRecorder->supportedAudioCodecs()) {
        ui->audioCodecBox->addItem(codecName, QVariant(codecName));
    }

    //containers
    ui->containerBox->addItem(tr("Default"), QVariant(QString()));
    for (auto &containerName: m_audioRecorder->supportedContainers()) {
        ui->containerBox->addItem(containerName, QVariant(containerName));
    }

    //sample rate
    ui->sampleRateBox->addItem(tr("Default"), QVariant(0));
    for (int sampleRate: m_audioRecorder->supportedAudioSampleRates()) {
        ui->sampleRateBox->addItem(QString::number(sampleRate), QVariant(
                sampleRate));
    }

    //channels
    ui->channelsBox->addItem(tr("Default"), QVariant(-1));
    ui->channelsBox->addItem(QStringLiteral("1"), QVariant(1));
    ui->channelsBox->addItem(QStringLiteral("2"), QVariant(2));
    ui->channelsBox->addItem(QStringLiteral("4"), QVariant(4));

    //quality
    ui->qualitySlider->setRange(0, int(QMultimedia::VeryHighQuality));
    ui->qualitySlider->setValue(int(QMultimedia::NormalQuality));

    //bitrates:
    ui->bitrateBox->addItem(tr("Default"), QVariant(0));
    ui->bitrateBox->addItem(QStringLiteral("32000"), QVariant(32000));
    ui->bitrateBox->addItem(QStringLiteral("64000"), QVariant(64000));
    ui->bitrateBox->addItem(QStringLiteral("96000"), QVariant(96000));
    ui->bitrateBox->addItem(QStringLiteral("128000"), QVariant(128000));

    connect(m_audioRecorder, &QAudioRecorder::durationChanged, this, &AudioRecorder::updateProgress);
    connect(m_audioRecorder, &QAudioRecorder::statusChanged, this, &AudioRecorder::updateStatus);
    connect(m_audioRecorder, &QAudioRecorder::stateChanged, this, &AudioRecorder::onStateChanged);
    connect(m_audioRecorder, QOverload<QMediaRecorder::Error>::of(&QAudioRecorder::error), this,
            &AudioRecorder::displayErrorMessage);
}

void AudioRecorder::updateProgress(qint64 duration)
{
    if (m_audioRecorder->error() != QMediaRecorder::NoError || duration < 2000)
        return;

    ui->statusbar->showMessage(tr("Recorded %1 sec").arg(duration / 1000));
}

void AudioRecorder::updateStatus(QMediaRecorder::Status status)
{
    QString statusMessage;

    switch (status) {
    case QMediaRecorder::RecordingStatus:
        statusMessage = tr("Recording to %1").arg(m_audioRecorder->actualLocation().toString());
        break;
    case QMediaRecorder::PausedStatus:
        clearAudioLevels();
        statusMessage = tr("Paused");
        break;
    case QMediaRecorder::UnloadedStatus:
    case QMediaRecorder::LoadedStatus:
        clearAudioLevels();
        statusMessage = tr("Stopped");
    default:
        break;
    }

    if (m_audioRecorder->error() == QMediaRecorder::NoError)
        ui->statusbar->showMessage(statusMessage);
}

void AudioRecorder::onStateChanged(QMediaRecorder::State state)
{
    switch (state) {
    case QMediaRecorder::RecordingState:
        ui->recordButton->setText(tr("Stop"));
        ui->pauseButton->setText(tr("Pause"));
        break;
    case QMediaRecorder::PausedState:
        ui->recordButton->setText(tr("Stop"));
        ui->pauseButton->setText(tr("Resume"));
        break;
    case QMediaRecorder::StoppedState:
        ui->recordButton->setText(tr("Record"));
        ui->pauseButton->setText(tr("Pause"));
        break;
    }

    ui->pauseButton->setEnabled(m_audioRecorder->state() != QMediaRecorder::StoppedState);
}

static QVariant boxValue(const QComboBox *box)
{
    int idx = box->currentIndex();
    if (idx == -1)
        return QVariant();

    return box->itemData(idx);
}

void AudioRecorder::toggleRecord()
{
    if (m_audioRecorder->state() == QMediaRecorder::StoppedState) {
        m_audioRecorder->setAudioInput(boxValue(ui->audioDeviceBox).toString());

        QAudioEncoderSettings settings;
        settings.setCodec(boxValue(ui->audioCodecBox).toString());
        settings.setSampleRate(boxValue(ui->sampleRateBox).toInt());
        settings.setBitRate(boxValue(ui->bitrateBox).toInt());
        settings.setChannelCount(boxValue(ui->channelsBox).toInt());
        settings.setQuality(QMultimedia::EncodingQuality(ui->qualitySlider->value()));
        settings.setEncodingMode(ui->constantQualityRadioButton->isChecked() ?
                                 QMultimedia::ConstantQualityEncoding :
                                 QMultimedia::ConstantBitRateEncoding);

        QString container = boxValue(ui->containerBox).toString();

        m_audioRecorder->setEncodingSettings(settings, QVideoEncoderSettings(), container);
        m_audioRecorder->record();
    }
    else {
        m_audioRecorder->stop();
    }
}

void AudioRecorder::togglePause()
{
    if (m_audioRecorder->state() != QMediaRecorder::PausedState)
        m_audioRecorder->pause();
    else
        m_audioRecorder->record();
}

void AudioRecorder::setOutputLocation()
{
#ifdef Q_OS_WINRT
    // UWP does not allow to store outside the sandbox
    const QString cacheDir = QStandardPaths::writableLocation(QStandardPaths::CacheLocation);
    if (!QDir().mkpath(cacheDir)) {
        qWarning() << "Failed to create cache directory";
        return;
    }
    QString fileName = cacheDir + QLatin1String("/output.wav");
#else
    QString fileName = QFileDialog::getSaveFileName();
#endif
    m_audioRecorder->setOutputLocation(QUrl::fromLocalFile(fileName));
    m_outputLocationSet = true;
}

void AudioRecorder::displayErrorMessage()
{
    ui->statusbar->showMessage(m_audioRecorder->errorString());
}

void AudioRecorder::clearAudioLevels()
{
    for (int i = 0; i < m_audioLevels.size(); ++i)
        m_audioLevels.at(i)->setLevel(0);
}

// This function returns the maximum possible sample value for a given audio format
qreal getPeakValue(const QAudioFormat& format)
{
    // Note: Only the most common sample formats are supported
    if (!format.isValid())
        return qreal(0);

    if (format.codec() != "audio/pcm")
        return qreal(0);

    switch (format.sampleType()) {
    case QAudioFormat::Unknown:
        break;
    case QAudioFormat::Float:
        if (format.sampleSize() != 32) // other sample formats are not supported
            return qreal(0);
        return qreal(1.00003);
    case QAudioFormat::SignedInt:
        if (format.sampleSize() == 32)
            return qreal(INT_MAX);
        if (format.sampleSize() == 16)
            return qreal(SHRT_MAX);
        if (format.sampleSize() == 8)
            return qreal(CHAR_MAX);
        break;
    case QAudioFormat::UnSignedInt:
        if (format.sampleSize() == 32)
            return qreal(UINT_MAX);
        if (format.sampleSize() == 16)
            return qreal(USHRT_MAX);
        if (format.sampleSize() == 8)
            return qreal(UCHAR_MAX);
        break;
    }

    return qreal(0);
}

// returns the audio level for each channel
QVector<qreal> getBufferLevels(const QAudioBuffer& buffer)
{
    QVector<qreal> values;

    if (!buffer.format().isValid() || buffer.format().byteOrder() != QAudioFormat::LittleEndian)
        return values;

    if (buffer.format().codec() != "audio/pcm")
        return values;

    int channelCount = buffer.format().channelCount();
    values.fill(0, channelCount);
    qreal peak_value = getPeakValue(buffer.format());
    if (qFuzzyCompare(peak_value, qreal(0)))
        return values;

    switch (buffer.format().sampleType()) {
    case QAudioFormat::Unknown:
    case QAudioFormat::UnSignedInt:
        if (buffer.format().sampleSize() == 32)
            values = getBufferLevels(buffer.constData<quint32>(), buffer.frameCount(), channelCount);
        if (buffer.format().sampleSize() == 16)
            values = getBufferLevels(buffer.constData<quint16>(), buffer.frameCount(), channelCount);
        if (buffer.format().sampleSize() == 8)
            values = getBufferLevels(buffer.constData<quint8>(), buffer.frameCount(), channelCount);
        for (int i = 0; i < values.size(); ++i)
            values[i] = qAbs(values.at(i) - peak_value / 2) / (peak_value / 2);
        break;
    case QAudioFormat::Float:
        if (buffer.format().sampleSize() == 32) {
            values = getBufferLevels(buffer.constData<float>(), buffer.frameCount(), channelCount);
            for (int i = 0; i < values.size(); ++i)
                values[i] /= peak_value;
        }
        break;
    case QAudioFormat::SignedInt:
        if (buffer.format().sampleSize() == 32)
            values = getBufferLevels(buffer.constData<qint32>(), buffer.frameCount(), channelCount);
        if (buffer.format().sampleSize() == 16)
            values = getBufferLevels(buffer.constData<qint16>(), buffer.frameCount(), channelCount);
        if (buffer.format().sampleSize() == 8)
            values = getBufferLevels(buffer.constData<qint8>(), buffer.frameCount(), channelCount);
        for (int i = 0; i < values.size(); ++i)
            values[i] /= peak_value;
        break;
    }

    return values;
}

template <class T>
QVector<qreal> getBufferLevels(const T *buffer, int frames, int channels)
{
    QVector<qreal> max_values;
    max_values.fill(0, channels);

    for (int i = 0; i < frames; ++i) {
        for (int j = 0; j < channels; ++j) {
            qreal value = qAbs(qreal(buffer[i * channels + j]));
            if (value > max_values.at(j))
                max_values.replace(j, value);
        }
    }

    return max_values;
}

void AudioRecorder::processBuffer(const QAudioBuffer& buffer)
{
    if (m_audioLevels.count() != buffer.format().channelCount()) {
        qDeleteAll(m_audioLevels);
        m_audioLevels.clear();
        for (int i = 0; i < buffer.format().channelCount(); ++i) {
            AudioLevel *level = new AudioLevel(ui->centralwidget);
            m_audioLevels.append(level);
            ui->levelsLayout->addWidget(level);
        }
    }

    QVector<qreal> levels = getBufferLevels(buffer);
    for (int i = 0; i < levels.count(); ++i)
        m_audioLevels.at(i)->setLevel(levels.at(i));
}
Felgo

Sign Up and Download for Free

By signing up, you consent to Felgo processing your data & contacting you to fulfill your request. For more information on how we are committed to protecting & respecting your privacy, please review our privacy policy.
Already have a Felgo account? Login here.
Want to find out if Felgo is a good fit for your company?

As part of the free Business evaluation, we offer a free welcome call for companies, to talk about your requirements, and how the Felgo SDK & Services can help you. Just sign up and schedule your call.

Sign up now to start your free Business evaluation:

  • Free personal evaluation call
  • Access to all Felgo Business license features
  • Up to 5 hours of free professional services
  • Private Slack channel
  • Priority support via Email or screen sharing
Qt_Technology_Partner_RGB_475 Qt_Service_Partner_RGB_475_padded